RadioMaster TX16S MKII Radio controller
RadioMaster TX16S MKII Radio controller
Specifications:
Features:
-
Improved internal circuitry and optimized power supply.
-
New charge circuitry with integrated reverse-polarity protection.
-
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
-
Rear-mounted audio jack provided headphone output.
-
V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
-
Optional high/low rear grips are included for improved ergonomics.
-
Improved S1/S2 knobs with clear centre-detents.
-
Improved LS/RS Sliders with smoother feel and better centre-detents.
-
Redesigned battery cover for improved battery access.
-
Retooled body shell with improved fit and finish.
-
Trainer socket changed to standard TRS 3.5mm socket.
-
Rear DIY Socket added for personalized mods.
-
Improved internal plastics for better longevity.
-
Available ELRS and 4in1 versions.
Specification
-
Item: TX16S Mark II
-
Size: 287x129x184mm
-
Weight: 750g (without battery)
-
Transmission frequency: 2.400GHz-2.480GHz
-
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401); Option 2: Internal ELRS (SX1280)
-
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
-
SD card: 256MB by default, 8GB maximum
-
Antenna gain: 2db (transmit power adjustable)
-
Working current: 400mA
-
Working voltage: 6.6-8.4v DC
-
Remote control distance:> 2km @ 22dbm
-
Radio firmware: EdgeTX
-
Module Firmware: Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS)
-
Channels: Up to 16 channels (depending on the receiver)
-
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
-
Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
-
Module Bay: JR compatible module bay
-
Upgrade method: Supports USB-C online / SD card offline upgrade
Support EdgeTX and OpenTX
EdgeTX is installed by default (Touch screen enabled).
* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.